Skip to main content

Sprayer

Sprayer have a variety of replacement nozzles for a wide range of applications.It can be used for fruit trees, crops,farm disinfection,etc.And there is breathable back cushion protects the back from damage.

Advantages:
This sprayer meets small farms require .Electric and manual can work .If there out of power,you can use hand and press push handle .It’s easy to operate .there is a controllable switch.It will work after you click for open ,and then start the pressure plate of the spray pipe,you can adjust sprinkler water mist size.It will be very helpful .

Adjustment:
  1. Install thesprayer parts correctly. Check the connection for leaks. When using, install the water test spray first, then refill the medicine.
  2. according to the operating procedures before the operation, strictly comply with the use of drugs to prepare pesticides. Before filling the liquid in the liquid medicine tank, be sure to turn off the switch to prevent the liquid from leaking out. The liquid should be filtered by the filter, and the liquid level of the liquid should not exceed the safe water level.
3.Put the sprayer on the back, press the pressure bar up and down to a certain pressure in the left hand (the number of compressions is about 30 times/min), and the handle of the right hand holds the handle of the spray bar to open the switch and swing the spray bar according to the plant being sprayed (or Area) The size of the switch is adjusted so that the nozzle can be sprayed up and down or left and right as required.
4.When the liquid is filled for the first time, since the air chamber and the spray bar contain clean water, the concentration of the liquid sprayed in the first 2 to 3 minutes of the sprayis low, so it is necessary to pay attention to the spray, so as not to affect the control effect of the pests and diseases.
5.Pay attention to the spraying, hand-eye coordination, force should be rhythm, spray the nozzle at the plant parts affected by pests and diseases, be thoughtful, uniform, correct and safe.
6.After the work is completed, the residual liquid in the barrel should be poured out in time, and washed with water to dry it. At the same time, check whether there is any water in the air chamber. If there is accumulated water, remove the water joint and release the accumulated water.
7.If the sprayeris not used in a short period of time, the main parts should be cleaned, wiped dry, and stored in a cool dry place. If it is not used for a long time, apply grease to each metal part to prevent rust.

Comments

Post a Comment

Popular posts from this blog

Plug seedling machine

Introduction to plug seedlings: The seedling raising technique is a modern seedling raising technique using a light substrate and soilless material such as peat, vermiculite as a seedling substrate, mechanized precision seeding, one hole and one seed, and one-time seedling formation. Mechanized seedling can be completed by using the nursery seeding machine . Plug seedlings are a new seedling technology developed in Europe and the United States in the 1970s. They are listed as key science and technology projects of the Ministry of Agriculture during the "7th Five-Year Plan" and "Eighth Five-Year Plan" period. It has become the main method for the production of specialized commercial seedlings in many countries. Advantages of plug seedlings: 1. Plug seedlings can be completed by mechanical means in the process of filling, sowing, germination, etc. The operation is simple and fast, and is suitable for large-scale production. 2. The seeds are evenly distr...
Post a Comment
Read more

sunflower seeds sheller machine

Brief Introduction : Our factory have three kinds of sunflower seeds sheller machine , TZ-200 is smallest model. TZ-200 sunflower seeds shelleringmachine have the advantages of smalll , cheap and is easily operated by every person. There is no more harm seeds.It can meets small farms produce require ,if there is big farm, we have big seeds thresher approach 1500-2000kg/Greatly reduced labor intensity and improved labor efficiency. We choose 2.2kw motor for this small model sunflower sheller machine,if you have small engine is okay .Please pay attention to the engine power,if the power bigger more ,the seeds will be broken .It will increase the broken rate. Matters needing attention: Please kindly put filling lubricant regularly to make sure thresher machine work well . The motor power is attached to home use voltage ,so if there is  something wrong with the electric,please click the switch button to close power. Model TZ-200 Power 2.2kw Capacity 10...
Post a Comment
Read more

How to thresh corn?

Everyone knows that corn is one of the larger crops in China, but when we harvest the corn after harvesting, it will make people feel very troublesome. When the technology of our country was not developed in the past, When everyone thought of using a manual peeling of corn, it was a very headache. When I was in junior high school, I experienced the threshing of corn by hand. At that time, I felt tired and not too much. It was very troublesome, but now the technology is developing rapidly. Next, we developed the  Corn sheller , using the machine to thresh the corn, let me take everyone to see which corn threshing method. 1. Hand-made threshing: This method is a method of threshing that is often seen in rural areas in the past few years. At that time, after the corn was threshed, all the blood was in the hands, and it was very uncomfortable to look at the heart, but that was Technology is very backward, and it can only be threshed by hand. At that time, the efficiency of corn...
Post a Comment
Read more